01
Diamond drilling
Core holes through reinforced concrete, brick and stone — for M&E penetrations, anchors, dowel bars, drainage and test cores. Wet drilling default.
↳ Capability per access
Diamond drilling & concrete cutting. Priced today. Cut this week.
Core holes, floor sawing, wall & track sawing, wire sawing, stitch drilling and service penetrations — quoted by the person who'll be on site, not a call-centre. Warwickshire-based crew covering Birmingham, Coventry, Leicester, Nottingham and the wider Midlands day-to-day; UK-wide for the right job. Emergency and out-of-hours slots most weeks.
Same-day
quotes where possible
< 4 hr
emergency call-out · Midlands
RAMS
in hours, not days
On-site · Midlands
Who we work for ↓
Main contractors · property developers · facilities teams · M&E specialists · commercial fit-out · local authorities · homeowners. Domestic one-off jobs welcome — same crew, same kit.
About · how we work
A small Midlands crew. Trade-trained.
01 · Where
Midlands base
Day-to-day work across the Midlands and surrounding counties. UK-wide by arrangement for jobs that warrant the trip.
02 · What
Drilling & cutting
Core holes, floor & wall sawing, wire sawing, stitch drilling, service penetrations and controlled concrete removal — through reinforced concrete, brick and stone.
03 · How
Low vibration · low disruption
Water, slurry and dust controlled. RAMS and site paperwork to suit the project. Live-site and occupied-building work planned around access, hours and the rest of the programme.
04 · Who for
Site subcontractor
Main contractors, M&E specialists, fit-out crews, FM teams, demolition and refurb. Trade-friendly, schedule-aware, programme-aware.
Services
What we cut. What we core.
02
Core drilling
Single or multi-cores for ducts, pipes, cables, drainage, anchors and sample extraction. Vertical, horizontal and overhead.
↳ V / H / Overhead
03
Concrete cutting
Floor sawing, wall & track sawing, wire sawing — controlled, water-managed cuts for openings, trenches and structural removal.
↳ Method per access
04
Service penetrations
Clean openings for HVAC, electrical, plumbing and comms. Marked from drawings, drilled to size, sleeved and fire-stopping coordinated where required.
↳ M&E ready
05
Specialist works
Stitch drilling, controlled concrete removal, structural openings, restricted-access work — planned around access and the live site.
↳ Subject to scope
06
Rapid & out-of-hours
Emergency call-outs, tight programmes, weekend permit windows, evening-only access — tell us when, we'll work to it.
↳ By arrangement
Why work with us
Specialist work.
Specialist work.
Site-manager pace.
What to expect ↓
Fast
Same-day quote when possible
Clean
Water & slurry managed on site
Flexible
Out-of-hours by arrangement
Insured
Cover details on request
Site subcontractor, programme-aware. Diamond drilling and concrete cutting planned around access, services and the rest of the trades on site. Quotes turned around fast, RAMS and site paperwork to suit the project, slab handed back clean. Send a drawing, sketch or phone photo with a postcode — we'll price it from there.
Planned properly before we cut
Concrete cutting goes wrong when it's treated as “just a few holes.”
Concrete cutting and core drilling go wrong when they're treated as “just a few holes” or “just a straight cut.” We check access, depth, reinforcement, services, dust, slurry, working hours and removal before the crew arrives — so the job doesn't slow the rest of the programme down.
- 01 · AccessFloor level, lift, parking, working room — checked off the brief, not assumed.
- 02 · Depth & materialSlab thickness, reinforcement density, substrate — picks the right method (core, floor saw, wall saw, wire, stitch).
- 03 · ServicesScanning where the slab is live, post-tensioned or unknown. Marked up before the rig is set.
- 04 · Slurry & dustWater managed and contained. HEPA extraction where wet isn't an option. No mess in the lobby.
- 05 · Working hoursLive retail, occupied offices, hospitals — out-of-hours and permit windows planned in.
- 06 · RemovalCores, cuts, spoil — bagged out, removed or stacked on site as agreed up front.
Quote assumptions stated up front. RAMS and site paperwork issued where required.
Rapid & out-of-hours work
Broken line? Missed sleeve? Weekend permit window? Call — if we can hit your slot, we'll tell you on the call.
Sectors
Who we work for.
01
Main contractors
02
Property developers
03
Facilities managers
04
M&E specialists
05
Commercial fit-out
06
Local authorities
Where we work
Based in the Midlands.
Based in the Midlands.
Travelling for the right job.
Day-to-day work runs across the Midlands and surrounding counties. We travel UK-wide for projects that warrant the trip — send the postcode, drawing or photo and we'll come back with a price.
M6
Day-to-day
Midlands & surrounding counties
UK
By arrangement
Anywhere · send a brief
Coverage detail:
Warwickshire ·
Coventry ·
Birmingham ·
Leicester ·
Nottingham ·
West Midlands ·
East Midlands ·
London ·
Manchester
Midlands · UK
Travel on request
For a fast, accurate quote
What to put in the brief.
The more we know up front, the tighter the quote — and the fewer assumptions on the day. If you only have a phone photo and a postcode, that's still enough to start.
01
Site postcode
Tells us travel, parking and access route. First half is enough to start.
02
Drawings & photos
M&E drawings, RC details, set-out marks, phone photos — whatever you have.
03
Hole Ø, no. of cores, cut length
Diameters (mm), how many, and any total run for sawing — guess if unsure.
04
Depth / slab thickness
Slab or wall thickness, full or partial depth, breakthrough or blind.
05
Material & reinforcement
Reinforced concrete, brick, stone — and any rebar density or post-tension known.
06
Orientation
Vertical, horizontal, overhead — or mixed. Affects rig set-up and time on site.
07
Access & floor level
Stairs / lift / hoist, parking, working room, occupied or live areas.
08
Water, power & slurry
Tap and 110/240 V on site? Slurry / dust restrictions — wet, dry or HEPA-only?
09
Hours & programme
Working hours, permit windows, deadline or programme pressure. Flag scanning / GPR if known.
FAQ
Common questions before you send the brief.
What is diamond drilling, and when do I need it?
Diamond drilling cuts clean, accurate, round holes through reinforced concrete, brick, stone and masonry — for service risers, ducting, drainage, anchors, dowel bars and core sampling. It's the right tool when a hammer drill or an SDS would crack the slab or leave a ragged opening. Typical sizes: small bores up to large-diameter penetrations.
Do you work outside the Midlands?
Day-to-day we're across Warwickshire, the West & East Midlands, Birmingham, Coventry, Leicester and Nottingham. We travel UK-wide for the right job — London, Manchester and everywhere between. Send a postcode with the brief and we'll come back on travel.
How fast can you get on site?
Emergency call-outs can be on site in under 4 hours across the Midlands, subject to crew location — we'll tell you straight on the call. Same-week is common for planned work; next-day and out-of-hours by arrangement.
Do you scan before you drill?
When the slab is live, post-tensioned, or anywhere reinforcement, services or PT cables matter — yes. We scan, mark up, and only commit to the cut once the picture's clean. On open ground or sacrificial slabs we'll skip it where it's safe to.
Can you keep the dust and water under control?
Yes. We work wet by default — slurry contained, water managed, vacuumed and bagged out. Dry cuts with HEPA extraction where wet isn't an option (live retail, occupied offices, sensitive finishes). Slab handed back clean and signed off.
What do I need to send for a quote?
A drawing, sketch or phone photo plus a postcode is enough to start. The more we know — slab thickness, rebar density, access, timing, working hours — the tighter the price.
Do you do out-of-hours and weekend work?
Regularly. Live retail, hospitals, occupied offices and infrastructure jobs often need it. Tell us the window when you send the brief.
Are you insured?
Yes — fully insured. Cover details, limits and certificates available on request.
Quote
Send the brief. We'll come back with a price.
Drawing, sketch, M&E plan or phone photo plus a postcode is enough to start. Reply comes from someone who'll be on site, not a call-centre. Quote assumptions stated up front.
01
Send the brief
Drawing, photo, or two lines describing the job.
02
We price it
Same-day reply where possible — typically within working hours.
03
Crew on site
Once you accept, we book the slot and mobilise.